Teck Global has a range of electrical equipment for hire from our Perth office.

Megger MOM2 240A handheld micro-ohmmeter

Picture of Megger MOM2 240A handheld micro-ohmmeter
  • Up to 220 A
  • Battery powered
  • Light weighs only 1 kg
  • Safe test – DualGround™
  • Auto range: 1 μΩ to 1000 mΩ
  • Bluetooth® PC communication
  • Complies with IEEE and IEC standards

Please contact us to discuss your requirements.

For more information, see https://us.megger.com/240a-handheld-micro-ohmmeter-mom2

Kelman TRANSPORT X

Picture of Kelman Transport X

The Kelman TRANSPORT X is a compact portable Dissolved Gas Analysis (DGA) system which can be used to analyze oil samples for all dissolved fault gases and moisture. If abnormal levels are detected, it further provides a diagnostic using various IEEE/IEC approved interpretation rules. It's key features include:

  • Wide detection range with excellent accuracy for all seven fault gases (typically 1-50,000 ppm).
  • Only 11kg (24lbs) in a rugged convenient carry case.
  • No carrier or calibration gases needed.
  • Suitable for transport on plane as hand luggage.

Please contact us to discuss your requirements.

CMC 356plus

Picture of CMC 256plus

The CMC 356plus is the first choice for applications requiring very high accuracy. This unit is not only an excellent test set for protection devices of all kinds but also a universal calibrator. It's key features include:

  • Protection test set and universal calibrator in one device
  • Testing of all relay generations - electromechanical, static, numerical, IEC 61850
  • Highly accurate test signals. For meter testing: The sources are the reference - no additional reference meters are required
  • Integrated network for testing IEC 61850 IEDs
  • 10-channel analog measurement and transient recording functionality (option)

Please contact us to discuss your requirements.

Megger MIT1025 - 10 kV diagnostic insulation resistance tester

Picture of a Megger MIT1025

The Megger MIT1025 is a light and conveniently-sized high voltage electrical equipment resistance testing device. Key features:

  • Measures up to 20 TΩ
  • PI, DAR, DD, SV and ramp test
  • Mains power as backup source
  • Li-ion battery with extended capacity and rapid charge
  • Advanced memory with time and date stamp
  • CATIV 600V safety rating

For further information, please see:

Megger DLRO10HD - 10A Battery Powered Ohmmeter (Ductor)

Picture of a Megger DLRO10HD

The Megger DLRO10HD is a light and portable, low resistance testing unit. It features:

  • High or low output power for varied diagnosis
  • Rechargeable battery or line power supply, continuous operation, even with a low battery
  • 10A for 60 seconds, less time waiting to cool, great for charging inductance
  • High input protection to 600V, inadvertent connection to line or UPS voltage will not blow a fuse
  • Heavy duty case: IP 65 lid closed, IP54 operational (battery operation only)
  • Rotary switch selects one of five test modes, including auto start on connection, giving ease of use

For further information, please see:

Megger SVERKER900 - Relay and Substation Test System

Picture of a Megger SVERKER900

The Megger SVERKER900 is a relay and substation test system with a number of features. It provides a range of testing options for three-phase voltage and current sources. Features include:

  • Three current and four voltage settings
  • Stand-alone functionality
  • Rugged and reliable for field use
  • Generation of 900V and 105A as a single phase
  • Primary and secondary testing

For further information, please see:

DC Laboratory Power Supplies

Picture of EA Elektro-Automatik EA-PS 8360-15 DT Bench Power Supply

Various power supplies available, for example EA Elektro-Automatik EA-PS 8360-15 DT Bench Power Supply, a 0-360V, 1500W power supply (pictured). Features include:

  • Microprocessor-controlled laboratory power supply with memory function; five preset values to be saved and recalled
  • High efficiency - up to 92%
  • Overvoltage protection
  • Overtemperature protection
  • 4-digit displays for voltage and current
  • Status indication via LEDs and display
  • Remote sense with automatic detection
  • Analogue interface
  • Temperature-controlled fans for cooling
  • Operating temperature 0 to 50°C

Please contact us to discuss your requirements and for further information, please see:

Assorted Power Transformers

We can supply transportable or temporary power transformers for your projects or operational needs. For high voltage (HV), typical transformers include 11kV or 33kV, whilst for low voltage (LV), typical options include 415V. We encourage clients seeking to hire power transformers to contact us directly.

Assorted Portable Generators

Picture of a diesel generator

We can supply a large range of diesel generators, from small to large in line with your requirements - generally these would include single phase and three phase generators ranging up to 1MVA (1000kVA). Please contact us to discuss your requirements.